ZX900 Hot Welder Σφήνα

Σύντομη περιγραφή:

 

Model: ZX900
Power(W): 1800W
Voltage(V): 220-230V
Rate(Hz): 50/60HZ
Weldingspeed(m/min): 0.5-5m/min
Heatingtemperature( °C): 0-450°C
Weldingwidth(mm): 15mm×2,Interior Cavity: 15mm
Thicknessofmaterial(mm): 1.5-3.0mm
Overlapwidth(cm): 12cm
Seam strength: ≥85%Material
Size(mm): 350x330x400mm
Usage: Plastic Welding,WeldingGeomembrane


  • OEM / ODM: Υπηρεσία Διαθέσιμο
  • Οι όροι πληρωμής: T / T, Western Union, PayPal, L / C, κλπ
  • :
  • Λεπτομέρεια προϊόντος

    Ετικέτες Προϊόντος

    Προδιαγραφές:

    ZX900

    ZX900

    εφαρμογές:
    Μπορεί να εφαρμόζεται για συγκόλληση ΡΕ, PVC, HDPE, EVA, ΡΡ και άλλες θερμού τήγματος υλικό.
    Ειδοποίηση:
    1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
    2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
    3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
    4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).
    The drop cable / wire with protective earthed conductors can only be used.
    5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
    6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
    7. Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.



  • Προηγούμενο:
  • Επόμενο:

  • Send your message to us:

    Γράψτε εδώ το μήνυμά σας και στείλτε το σε εμάς

    Σχετικά προϊόντα

    Send your message to us:

    Γράψτε εδώ το μήνυμά σας και στείλτε το σε εμάς