ZX900 vevela Welder tina

Faamatalaga puupuu:

 

Model: ZX900
Power(W): 1800W
Voltage(V): 220-230V
Rate(Hz): 50/60HZ
Weldingspeed(m/min): 0.5-5m/min
Heatingtemperature( °C): 0-450°C
Weldingwidth(mm): 15mm×2,Interior Cavity: 15mm
Thicknessofmaterial(mm): 1.5-3.0mm
Overlapwidth(cm): 12cm
Seam strength: ≥85%Material
Size(mm): 350x330x400mm
Usage: Plastic Welding,WeldingGeomembrane


  • OEM / ODM: Auaunaga Maua
  • Tuutuuga totogiina: T / T, Western Union, PayPal, L / C isi
  • :
  • Faamatalaga oloa

    pine o oloa

    auiliili:

    ZX900

    ZX900

    talosaga:
    E mafai ona talafeagai mo le maopoopo PE, PVC, HDPE, Eva, pp ma isi mea liusuavai vevela.
    Faasilasilaga:
    1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
    2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
    3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
    4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).
    The drop cable / wire with protective earthed conductors can only be used.
    5. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
    6. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
    7. Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.



  • Talu:
  • Sosoo ai:

  • Send your message to us:

    Tusi lau savali iinei ma auina mai ia i tatou

    Fesootai Products

    Send your message to us:

    Tusi lau savali iinei ma auina mai ia i tatou