Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

It adheres to the tenet "Honest, industrious, enterprising, innovative" to develop new products constantly. It regards customers, success as its own success. Let us develop prosperous future hand in hand for Ceramic Alumina Balls , Ceramic Pot With Metal Stand , Refractory Ceramic Pot , As a key enterprise of this industry, our company makes efforts to become a leading supplier, based on the faith of professional quality & worldwide service.
Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder Detail:

 

Specifications:

 

Type ZX5700
Power(W) 3000W
Voltage(V) 220-230V
Rate(Hz) 50/60HZ
Welding speed(m/min) 0.5-4m/min
Heating temperature(℃) 20~600℃
Welding width 15mmx2,interior cavity 15mm
Condition New
Warranty 1 Year
Color Green
Packaging Aluminum box
Package size 350x330x400mm
Usage For welding PE PVC and other hot melt materials
Certificate CE
Thickness of material 0.5mm-2.0mm
Overlap width 16cm
Seam strength ≥85% base material(tensile resistant in shear direction)

 ZX5700

 Applications:

It can be applicable for welding PE、PVC、HDPE、EVA、PP and other hot melt material.

 

  Notice:

  1. Unplug the tools before opening it to avoid of being hurt by exposed wires or component inside the machine with power
  2. Incorrect use of it can cause fire and explosion hazard because of high temperature, especially near combustible materials and explosive gases.
  3. Don’t touch heater tube and nozzle when they are hot. They may cause burns. Don’t point hot air flow in the direction of people or animals.
  4. The voltage rating stated on the welder must correspond to line/mains voltage (220V).

The drop cable / wire with protective earthed conductors can only be used.

  1. To ensure operator safety and reliable operation of equipment, the power supply must be installed power supply and leakage protection at the construction site.
  2. It must be running at the correct use of manipulation of the operator, or they may cause a fire or explosion caused by high temperature.
  3. Don’t use welder in the water, or on a muddy construction site, to avoid flooding, rain or moisture.

Please contact us for explosive view of the welding machine.

Welding process:

  1. Please lift the pressure handle (14) to separate the upper and down pressure roller (12), then plug the power and open the on power switch.
  2. Setting the welding parameters according to the data of welding test.
  3. Please wait the actual temperature value reaching the setting value.
  4. Put the welder at the welding position and put the two prepared materials (one up and the other one down) into the machine.
  5. Press the pressure handle (14) to make the upper and down pressure roller (12) in place. Then open the moving switch (31), the machine would start walking and welding automatically.
  6. To observe the relative position of the welding seam and the edge of the welded membrane at any time. It must be promptly corrected if there is deviation.
  7. When the welder walks into the end of material, the pressures handle needs to be lifted to separate the upper and down pressure roller in time.
  8. After completion of the welding work, press the buttons (24) and (25) on the panel to make the hot air blower in a cold blowing condition in order to cool the nozzle.

 

 

 


Product detail pictures:

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures

Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder detail pictures


Related Product Guide:

As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Good Quality Plastic Welding - ZX5700 Hot Wedge Welding machine – Heatfounder, The product will supply to all over the world, such as: Morocco, Cyprus, Chile, We've been proud to supply our products and solutions to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
  • Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
    5 Stars By Maud from Denmark - 2016.11.01 17:04
    Cooperate with you every time is very successful, very happy. Hope that we can have more cooperation!
    5 Stars By Diana from Stuttgart - 2016.08.21 14:13

    Send your message to us:

    Write your message here and send it to us

    Related Products

    Send your message to us:

    Write your message here and send it to us