Single end cartridge heater
Cartridge heater is cylindrical electrical heating elements.
The watt density can reach 25 W/cm2 and operating temperature can go up to 600°C .
Mostly Cartridge Heater are used for water or molding.It’s used for heating up solids such as injection presses heating plates or various tools,.
Cartridge heater can also be used for heating up water of gases under certain conditions,widely used for manufacturing plastic and rubber parts in the car industry or in the food processing industry, etc .
Cartridge heaters are also commonly found in the chemical, electronics, medical equipment, packing and nuclear industries.
1 Tube diameter: Φ3mm-Φ30mm
2 Tube Material:SS304;SS316,SS321,INCOLOY800 etc
3 Insulation Material:High-purity Mgo
4 Reisistance wire element:Ni-Cr or FeCr
5 Lead Connection Option: Crimped or Swaged leads
6 Lead and type of connection leads, 10″ Fiberglass Standard(Wire options,silicone high temperature frberglass).
|Heat intensity||Not exceeding 30Wcm2 (advisable)|
|Power||Depends on the dimension|
|Escape of current (when cold)||<=0.1mA a 242 v.|
|Insulation (when cold)||5 Min Ohmios 500 Watts minimum|
|Dielectric strength||1500v. 1/seg|
|Working temperature||750ºG max.|
|Tolerance of length||+/-1.5%|
|Tolerance of diameter||-0.01 a -0.06 m/m|
|Tolerance of cut of connexion||+/-15 mlm|
|Power tolerance (w)||5 % - 10 %|
|Cold areas||Depends on length and diameter 5-25mm|
We offer OEM/ODM service and heating solution.